RE-120GR
Choose the best products in our company
RE-120GR
specification
- Zone Disable (Isolation) facility with loop voltage cut off.
- Resettable 24v DC output for 4 wire detectors.
- Three 24V Sounder Output (Fire, after Cross zone,
- after gas release).
- Two mode operation facility (Auto / Manual).
- Programmable Solenoid Output with ON and OFF Timer.
- Programmable Main / Standby Cylinder output Facility.
- Gas Inhibit and Instant release facility.
- Manual Gas Release with or without timer.
- Actuator pressure low sensing facility.
- RS 485 Output for Repeater.
- Zone Disable (Isolation) facility with loop voltage cut off.
- Resettable 24v DC output for 4 wire detectors.
- Three 24V Sounder Output (Fire, after Cross zone,
- after gas release).
- Two mode operation facility (Auto / Manual).
- Programmable Solenoid Output with ON and OFF Timer.
- Programmable Main / Standby Cylinder output Facility.
- Gas Inhibit and Instant release facility.
- Manual Gas Release with or without timer.
- Actuator pressure low sensing facility.
- RS 485 Output for Repeater.
| Brand Model | RE-120GR | ||
|---|---|---|---|
| Power | |||
| 220-240 VAC, 50 Hz. Wire size: 1.5 Sq. mm with 600V insulation |
|||
| Battery (Lead Acid only) | |||
| Charging Voltage | 28 VDC. | ||
| System Quiescent Current | 80mA | ||
| Initiating Device Circuits (Zone Circuit) | |||
| All zones are Class B wiring | |||
| Normal Operating Voltage | Nominal 24 VDC | ||
| Alarm Current | 15 - 35mA | ||
| Short Circuit Current | 40mA Maximum | ||
| Loop resistance | 50 ohms Maximum | ||
| Notification Appliance Circuits (Sounder / Strobe Circuit) | |||
| 1) Supervised | |||
| Operating Nominal Voltage | 24 VDC | ||
| Operating Current | 0.75A (Max) | ||
| 2) Non - Supervised | |||
| Operating Nominal Voltage | 24 VDC | ||
| Operating Current | 0.3A (Max) | ||
| End-Of-Line Resistor | 4.7K, 1/4watt | ||
