TINYON IP 2000 PIR
specification
- Compact and stylish 720p indoor IP camera
- PIR-based motion and audio detection
- Integrated white light for night time viewing
- FTP, Dropbox and e-mail alarms
- SD card slot for local recording
Functions
Motion and audio detection
The integrated wireless LAN feature supports the IEEE 802.11b, g and n standards allowing the camera to connect to fast WiFi access points. The WPS button provides an easy and simple way to set up the wireless LAN connection and security settingsMultiple streams
The innovative multi-streaming feature delivers various H.264 streams together with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems. Depending on the resolution and frame rate selected for the first stream, the second stream provides a copy of the first stream or a lower resolution stream. The third stream uses the I-frames of the first stream for recording; the fourth stream shows a JPEG image at a maximum of 10 Mbit/s.Built-in microphone and loudspeaker
The built-in microphone and loudspeaker allows remote users to listen in on an area and communicate messages to visitors or intruders via the loudspeaker. Audio detection can be used to generate an alarm if needed.System integration
The camera conforms to the ONVIF Profile S specification. Compliance with this standard guarantees interoperability between network video products regardless of manufacturer. Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Visit the Bosch Integration Partner Program (IPP) website (ipp.boschsecurity.com) for more information.HD standards
Complies with the SMPTE 296M-2001 Standard in:- Resolution: 1280x720
- Scan: Progressive
- Color representation: complies with ITU-R BT.709
- Aspect ratio: 16:9
- Frame rate: 25 and 30 frames/s
| Brand Model | TINYON IP 2000 PIR | ||||
|---|---|---|---|---|---|
| Power | |||||
| Power Supply | +5 VDC via supplied power adapter; Power-over-Ethernet 48 VDC nominal | ||||
| Power Consumption | 3.7 W | ||||
| PoE | IEEE 802.3af (802.3at Type 1) Power level: Class 1 | ||||
| Power adapter | 100-240 VAC to +5 VDC power supply included | ||||
| Sensor | |||||
| Type | 1/4-inch CMOS | ||||
| Total sensor pixels | 1280 x 800 (1MP) | ||||
| Video performance – Sensitivity (3200K, 89% reflectivity, 30IRE, F2.8) | |||||
| Sensitivity | 1.0 lx 0.0 lx (with LED) | ||||
| Video performance - Dynamic range | |||||
| Dynamic range | 76 dB | ||||
| Video streaming | |||||
| Video compression | H.264 (MP); M-JPEG | ||||
| Streaming | Multiple configurable streams in H.264 and MJPEG, configurable frame rate and bandwidth. | ||||
| Overall IP Delay | Min. 120 ms, Max. 340 ms | ||||
| GOP structure | IP, IBP, IBBP | ||||
| Encoding interval | 1 to 30 ips | ||||
| Video resolution (H x V) | |||||
| 720p HD | 1280 x 720 (at 30 ips) | ||||
| Upright 9:16 (cropped) | 400 x 720 | ||||
| D1 4:3 (downscaled/ cropped) | 704 x 480 | ||||
| 480p SD | Encoding: 704 x 480; Displayed: 854 x 480 | ||||
| 432p SD | 768 x 432 | ||||
| 288p SD | 512 x 288 | ||||
| 240p SD | Encoding: 352 x 240; Displayed: 432 x 240 | ||||
| 144p SD | 256 x 144 | ||||
| Video functions | |||||
| Adjustable picture settings | Contrast, Saturation, Brightness | ||||
| White Balance | Standard automatic mode, manual mode and hold | ||||
| Shutter | Automatic Electronic Shutter (1/30 to 1/150000) Fixed shutter (1/30 to 1/15000) selectable | ||||
| Backlight compensation | On/off | ||||
| Noise reduction | Intelligent Dynamic Noise Reduction | ||||
| Privacy Masking | Four independent areas, fully programmable | ||||
| Video Analysis | MOTION+ | ||||
| Other functions | Image mirror, Image flip, Pixel counter, Video watermarking, Display stamping, Motion detection, Tamper alarm, Audio alarm | Audio streaming | |||
| Standard | G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC-LC, 48 kbps at 16 kHz sampling rate AAC-LC, 80 kbps at 16 kHz sampling rate | ||||
| Signal-to-Noise Ratio | >50 dB | ||||
| Audio compression | AAC-LC, G.711, L16 (live and recording) | Input/output | |||
| Audio input | Built-in microphone | ||||
| Audio output | Built-in loudspeaker | ||||
| Alarm input | 1 input | ||||
| Alarm activation voltage | 0 to 3.3 VDC active low, or short | ||||
| Alarm output | 1 output | ||||
| Alarm output voltage | +5 VDC Load current 1 A max. | ||||
| Detection | |||||
| Detector | PIR (passive infrared) | ||||
| Distance | 5 m (16 ft) | ||||
| Detection angle | 90° (H) | ||||
| Night vision | |||||
| Distance | 4 m (13 ft) | ||||
| Illumination | White light LED | ||||
| Optical | |||||
| Lens type | Fixed 2.5 mm, F2.8 | ||||
| Lens mount | Board mounted | ||||
| Horizontal field of view | 89° | ||||
| Vertical field of view | 50° | ||||
| Local storage | |||||
| Internal RAM | 10 s pre-alarm recording | ||||
| Memory card slot | Supports up to 32 GB microSDHC / 2 TB microSDXC card. (An SD card of Class 6 or higher is recommended for HD recording) | ||||
| Recording | Continuous recording, ring recording. alarm/ events/schedule recording | ||||
| Software | |||||
| Unit Configuration | Via web browser or Configuration Manager | ||||
| Firmware update | Remotely programmable | ||||
| Software viewer | Web browser, Bosch Video Client, or third party software | ||||
| Network | |||||
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIBII), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication | ||||
| Encryption | TLS 1.0, SSL, DES, 3DES | ||||
| Ethernet | 10/100 Base-T, auto-sensing, half/full duplex | ||||
| Connectivity | ONVIF Profile S , Auto-MDIX | ||||
| Mechanical | |||||
| Dimensions (W x H x L) | 109 x 65 x 47 mm (4.29 x 2.56 x 1.85 in) | ||||
| Weight | 105 g (3.70 oz) | ||||
