Loading...

TINYON IP 2000 WI

Choose the best products in our company
Home / Product / bosch / HD-MP FIXED CAMERAS /TINYON IP 2000 WI

TINYON IP 2000 WI


specification

  • Compact and stylish 720p indoor wireless LAN camera
  • IEEE 802.11b/g/n wireless connectivity
  • WPS for easy wireless network setup
  • Built-in PIR motion detector and white light illuminator
  • FTP, Dropbox and e-mail alarms

Functions

Integrated wireless connection

The integrated wireless LAN feature supports the IEEE 802.11b, g and n standards allowing the camera to connect to fast WiFi access points. The WPS button provides an easy and simple way to set up the wireless LAN connection and security settings

Multiple streams

The innovative multi-streaming feature delivers various H.264 streams together with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems. Depending on the resolution and frame rate selected for the first stream, the second stream provides a copy of the first stream or a lower resolution stream. The third stream uses the I-frames of the first stream for recording; the fourth stream shows a JPEG image at a maximum of 10 Mbit/s.

Motion and audio detection

The built-in passive infrared (PIR) sensor detects motion within 5 meters, even in complete darkness. It can then trigger an alarm, start recording or switch on the integrated white light LED to provide illumination in darkened rooms. These functions can also be activated by the detection of sound by the built-in microphone.

System integration

The camera conforms to the ONVIF Profile S specification. Compliance with this standard guarantees interoperability between network video products regardless of manufacturer. Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Visit the Bosch Integration Partner Program (IPP) website (ipp.boschsecurity.com) for more information.

HD standards

Complies with the SMPTE 296M-2001 Standard in:
  • Resolution: 1280x720
  • Scan: Progressive
  • Color representation: complies with ITU-R BT.709
  • Aspect ratio: 16:9
  • Frame rate: 25 and 30 frames/s

Brand Model TINYON IP 2000 WI
Power
Power Supply +5 VDC via supplied power adapter
Power Consumption 4.4 W typical
PoE 100-240 VAC to +5 VDC power supply included
Sensor
Type 1/4-inch CMOS
Total sensor pixels 1280 x 800 (1MP)
Video performance – Sensitivity (3200K, 89% reflectivity, 30IRE, F2.8)
Sensitivity 1.0 lx 0.0 lx (with LED)
Video performance - Dynamic range
Dynamic range 76 dB
Video streaming
Video compression H.264 (MP); M-JPEG
Streaming Multiple configurable streams in H.264 and MJPEG, configurable frame rate and bandwidth.
Overall IP Delay Min. 120 ms, Max. 340 ms
GOP structure IP, IBP, IBBP
Encoding interval 1 to 30 ips
Video resolution (H x V)
720p HD 1280 x 720 (at 30 ips)
Upright 9:16 (cropped) 400 x 720
D1 4:3 (downscaled/ cropped) 704 x 480
480p SD Encoding: 704 x 480; Displayed: 854 x 480
432p SD 768 x 432
288p SD 512 x 288
240p SD Encoding: 352 x 240; Displayed: 432 x 240
144p SD 256 x 144
Video functions
Adjustable picture settings Contrast, Saturation, Brightness
White Balance Standard automatic mode, manual mode and hold
Shutter Automatic Electronic Shutter (1/30 to 1/150000) Fixed shutter (1/30 to 1/15000) selectable
Backlight compensation On/off
Noise reduction Intelligent Dynamic Noise Reduction
Privacy Masking Four independent areas, fully programmable
Video Analysis MOTION+
Other functions Image mirror, Image flip, Pixel counter, Video watermarking, Display stamping, Motion detection, Tamper alarm, Audio alarm
Audio streaming
Standard G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC-LC, 48 kbps at 16 kHz sampling rate AAC-LC, 80 kbps at 16 kHz sampling rate
Signal-to-Noise Ratio >50 dB
Audio Streaming Full-duplex / half duplex
Input/output
Audio input Built-in microphone
Audio output Built-in loudspeaker
Alarm input 1 input
Alarm activation voltage 0 to 3.3 VDC active low, or short
Alarm output 1 output
Alarm output voltage +5 VDC Load current 1 A max.
Detection
Detector PIR (passive infrared)
Distance 5 m (16 ft)
Detection angle 90° (H)
Night vision
Distance 4 m (13 ft)
Illumination White light LED
Optical
Lens type Fixed 2.5 mm, F2.8
Lens mount Board mounted
Horizontal field of view 89°
Vertical field of view 50°
Software
Unit Configuration Via web browser or Configuration Manager
Firmware update Remotely programmable
Software viewer Web browser, Bosch Video Client, or third party software
Wireless LAN
Wireless standard IEEE 802.11b/g/n
Wireless security WPA-PSK (TKIP), WPA2-PSK (AES)/td>
WiFi protected setup WPS button, PIN
Network
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIBII), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Encryption TLS 1.0, SSL, DES, 3DES
Ethernet 10/100 Base-T, auto-sensing, half/full duplex
Connectivity ONVIF Profile S , Auto-MDIX
Mechanical
Dimensions (H x W x D) 109 x 65 x 47 mm (4.29 x 2.56 x 1.85 in)
Weight 105 g (3.70 oz)

WORKING days
  • Monday(9:30am-6:00pm)
  • Tuesday(9:30am-6:00pm)
  • Wednesday(9:30am-6:00pm)
  • Thursday(9:30am-6:00pm)
  • Friday(9:30am-6:00pm)
  • Saturday(9:30am-6:00pm)
  • Sunday(Holiday)